Assigning Form Blocks to Tests in a Batch

You can assign form blocks to tests in a batch in the Assignment In Progress section.

1. Click Assign beside a batch. The Assign Blocks - Batch window appears.

2. Optional: If the tests available in the batch are incorrect, then click Modify Batch to open the Create/Edit a Batch window. When you’re done selecting tests as described in Creating a Batch of Tests, click Create/Edit to return to the Assign Blocks - Batch window.

3. In the Tests section, click Assign beside a test. The Assign Approved Blocks to Test window appears. The Approved Form Blocks section on the left lists blocks whose attributes match the batch’s attributes.

4. In the Approved Form Blocks section, use the checkboxes to select blocks, which are then listed in the Selected Blocks section.

5. Click Save. The Assign Approved Blocks to Test window closes, returning you to the Assign Blocks - Batch window, with blocks populated under the tests listed on the left.

6. To assign blocks to more tests or to edit your assignments, repeat steps 3–5 as needed.

7. Optional: In the Comments section, enter anything you want to document and click Add Comment.

8. Once the batch has all the tests and forms needed, click Review Assignments. The Review Assign Blocks - Batch window appears.

9. Review the table of block assignments in the Assignments section.

10. In the Approval Comment section, enter a comment.

11. Click Approve Assignments. The Review Assign Blocks - Batch window closes and the batch moves into the Mapping In Progress section of the Test Assembly - Main Index page. The batch is now ready to have form blocks mapped to its test segments, as described in Mapping Form Blocks to Test Segments in a Batch.

You can view the current state of the batch using the View button in the Mapping In Progress section.